service description:

service description:

GTC VULKANIZER
21220 Bečej, Branka Radičevića 48


Activities of the company:

- retail of tires, parts, batteries, oil, antifreeze
- Mounting and balancing all types of wheels, passenger and freight
- Mechanical correction of aluminum and steel wheels


About Us

We have 20 years of experience in doing the following services:

- mounting and demounting all kinds of wheels (passenger, freight, agricultural, tires for motorcycles)
- mechanical correction of aluminum and steel wheels
- balancing wheels (passenger and freight)


Show us your trust and buy in our shops:

- all types of tires
- SHELL motor oils
- HELLA and BOSCH supplies
- complete equipment for auto electrics for all kinds of vehicles HELLA, ASPACT, MENBERS
- BLACK HORSE, BOSCH, EKSIDE batteries
- complete aerial installation for commercial vehicles HALDEX, WAPCO


WE GUARANTEE FIRST-CLASS SERVICE AND
AFFORDABLE PRICES!

service description:

service description:

Turbines | Eelectric motors | Egenerators

Electro lune Ltc. is one of the leading companies in the country in sales of electric motors and gears.

The company is a result of a small craft shop established in 1985. We have gradually developed and expanded our product range. Today our company, except the largest selection of electric motors and gears, about 10.000, in its sales line has a large selection of gears, sprockets, gears, couplings, cardans, vibrating motor, electronics.

For our regular customers we have an obligation storage of goods and possibility of deferred payment. Warranty for all products is 1 year. We solve complaints for one day. We can always offer you technical solutions and service.

Our goal beside selling is to be unique in service, choice and quality.

The company "Elektro Lune" is the distributor of the Italian companies:

Chiaravalli Electric motors, gear units, variators, sprockets, racks, connectors, housing stock, gears, angular gears, clamping joints…
…detailes >>> CHIARAVALLI

OMB Vibrating motors

…detailes >>> OMB


SEIPEE Three-phase motors to 900 kW, single phase electric motors, electric motors with brake, ATEX motors, drives motors, electric motors with encoder …detailes >>> SEIPEE


STM gear-bevel gearboxes, planetary gearboxes, parallel shaft-mounted gearboxes, drives

…detailes >>> STM




FILLI ARAMINI cardan joints

…detailes >>> FILLI ARAMINI



ELVEM Elvem program elektromotora

…detailes >>> ELVEM



CBI Centrifugalni ventilatori


…detailes >>> CBI





Other: pump body of stainless steel, water pumps, industrial vacuum cleaners, vacuum air turbine, axial fans, radial turbines.

service description:

SILOS TECH LTD

EQUIPMENT FOR STORAGE AND TRANSPORT OF GRAIN,
SYSTEMS FOR PREPARATION AND MIXING FODDER
METAL CONSTRUCTIONS FOR SILOS
GEBI - ANIMAL FODDER

Silos Tech was established as a family company in 2006. Our occupation consists of 3 parts: wholesale of feed, production of transport equipment for supply of vet station and silos. We produce equipment for storages, ventilation, transport of various grains, screw conveyors, elevators, equipment for feed preparation, machines for feed mixing. We also produce metal construction for silos.

Last year we had large investments in production, including the construction of the hall of 1000 m2, CNC plasma and flame cutter, CNC presses of 300 tons, NC scissors and in various machines.


We expanded our occupation with service business. Currently, we have 42 employees.
Our references are: 25 silos by year and the biggest is Gebi doo Cantavir.

Our goal is to increase production, to expand the assortment and to improve the production.



CONTACT:

Silos-Tech doo
Senta, Serbia
Horti Ištvana 54
Tel/fax: 024/821-906
Production: Industrijski put bb, 063/635-043
Wholesale: Subotički put 9, 024/814-699
Retail Sale: Arpadova 77/a, 063/7197-756

E-mail: office@silostech.com

Web: www.transporteri.rs

service description:

"GRAFOPRODUKT" doo SUBOTICA
*PUBLISHING AND PRINTING BUSINESS
*PRINTING SERVICES
EN ISO 9001:2008
EN ISO 14001:2004
EN ISO/IEC 27001:2005
EN ISO 50001:2011
OHSAS 18001:2007
Excellent SME


The printing and publishing company "GRAFOPRODUKT" was established in 1992. The development direction of the company is not just about the enlargement of our machine park, but also increasing the number of our staff, in order to meet the demands of the market and to find new potential opportunities for collaboration.

In addition to publishing books and newspapers we can print catalogs, brochures, leaflets and make light cardboard packaging and labels.


PREPARATION
3 operators work on high capacity computers, that allows undisturbed work. We do services like: scanning, filming and CTP panel lighting.

To satisfy our customers we also do:
- book fracturing
- designing of catalogs and commercial surfaces
- making logos
- making photographs in high resolution - of buildings, products and objects for different publications.

You can read more about the delivery of printing material and our offer on: www.grafoprodukt-subotica.rs


OFFSET
The basic technology is offset printing.
We have 4 offset machines:

- Four colored B2
- Two colored B2
- Four colored A3
- One colored B3

Our technical abilities allow printing on papers from 60 to 400 grams.

In addition, we have digital printing and large format printing.


SOLVENT
- Mimaki CJV solvent printer (CJV30-160)
- Integrisani solvent printer-cutter (Print&Cut)
- Mimaki CJV30 solvent printer-cutter is an advanced version of the old Mimaki JV3 solvent printer, with a unique integrated system for printing and cutting, what brigs us a much bigger choice and flexibility in our work.
Starting from souvenir shops, copiers, design agencies, to screen printers, we offer our services of making advertisements and other printing services, the CJV30 series offer high performance printing and cutting to its customers. Advertisements of large format, such as large posters, graphics, POP displays, backlit, window decoration, car graphics, floor advertising, etc..
We are not able to perform fieldwork (measuring, gluing, etc.).

We are able to provide the following services: laminating, plastic coating, film and plate (CTP) lightening , design, fracturing.


FINISHING WORKS
There are three professional bookbinders who do finishing works. Their professionalism is completed by our machine park: benders, collectors, plastic coating makers, laminating machines, benders and staplers of large format.
Besides the above mentioned machine park there are some auxiliary devices which allow us to do:
- numbering
- punching up to format B2 (folders, boxes)
- gluing and sewing books.

Our business partners can count on fast and quality works.


Visit our website www.grafoprodukt-subotica.rs everyone will find something interesting. Because of limited space, it is impossible to present the full range of the production program.
Ask us for an offer and detailed information.

E-mail: grafosu@mts.rs Tel.: 024/555-032
E-mail: office@grafoprodukt-subotica.rs
E-mail: director@grafoprodukt-subotica.rs
E-mail: commerce@grafoprodukt-subotica.rs

service description:

CONTACT US

011/263-74-16 or 064/29-59-011

TOPERS Company Ltd. from Belgrade was established in 1990.
Thw main activity of the company is renting - renting of construction scaffolding on "keys in hands" system.


- Construction scaffolding
- Scaffolding renting for all types of construction works
- Making of scaffolding constructions with development projects
- Installation
- Removal
- Transport
- Project developing
- Grounding of scaffolding


20 years experience

We possess certificates of applied international conventions on work safety for our scaffoldings

* Rental - scaffolding rent
* Space
* Assembly and disassembly of scaffolding
* Transport
* Additional protective equipment
* Projects and study developing for scaffolding installation
* Work platforms making
* Awning making
* Site enclosure

Topers Doo


Contact:
Topers Ltd.
Dunavska 25
1100 Beograd
Serbia
Tel.: +381 11 2637 416
Mob : +381 64/29-59-011
E-mail: info@topers.co.rs
Web: www.skele-topers.com

service description:

Producing machines for metal plasticization.
Reliable and very effective in work.

Service and maintenance.
In our offer you can find used machines too, or machines which were changed for new.
We give warranty for all our appliances:
- for new appliances 2years
- for used appliances 1year

Apart from being regarded as a high-quality surface protection providing resistance to wearing out - mechanical damages, certain aggressive surroundings, powder coating is also considered to be one of the standards applied in the protection of the environment, because solvents and additives which are harmful to health and environment are not used in the process of electrostatic powder coating.
During the construction of implements, a compromise between West European quality and a price adjusted to Serbian market was attained.

Plastamat PM - 8Device for powder coating of metals. Its very handy when used in the workshops where are both automatic and manual powder coating with color powder are in use.
This device is developed for constant operational use.Container can take up to 15 liters of powder.

Plastamat PM - 9More advanced device for powder coating of metals. Its very handy when used in the workshops where are both automatic and manual powder coating with color powder are in use.

This model have vibro stand witch is very good for constant color shifting. It takes color powder directly for the package. One of the advantages is that Plastamat 9 can operate with only 0,1 liter of powder.

Plastamat PM - MINIDevice for powder coating of metals. As it name saids, it the basic model.

This models can capacity is 4 liters of powder.

service description:

Beniš Alexander entrepreneur from Subotica, for more than 11 years, offers:

- Vehicles transport from abroad
- Goods transportation to 7.5 tons in the country and abroad
- Customs service

- Construction works with a construction
mechanization
- Land Works
- Demolition of buildings, debris remove
- Working with construction machinery, such as
cranes, several types of excavator (excavator for stone digging, excavators for channel digging, etc.)

We have no region limit!


New!

Our company imports and sales agricultural machines, such as: tractors, harvesters, equipments, etc. from famous manufacturers:

FENDT, MASSEY, FERGUSSON, CASE, RENAULT and
DEUTZ FAHR

Services with all kinds of construction machinery
Sand and gravel are available at low prices with transport
Forklift services with a capacity from 2T-16T
Telehender services - 4T capacity at a height of 9m
Crane services of 30T, 40T and 60T
Arrangement of parking space
Stone crusher (service and sales of stone from stock)

Contact: Tel. 065/258-02-58 and 065/520-06-11
E-mail address: benisa@ymail.com

service description:

service description:

Evolva d.o.o. from Pozega is engaged in wholesale trade of products intended for external plumbing.

In our offer you can find products from reputable manufacturers such as:
- VAG Armaturen Group
- Georg Fischer Piping Systems
- Georg Fischer WAGA
- Duktus
- IMP Armature
- Zagožen
- Aplast
- MZT

We emphasize that besides fulfilling the daily requirements of our customers, we are able to respond to complex large water facility projects. Main water supply systems, water treatment plants, dams, hydropower plants, etc.

service description:

If you need power...
HERON - a Czech brand of professional generators and pumps.
Heron is headquartered in Zlin, south part of the Czech Republic.

Importer and distributor for Serbia:

Madal Bal d.o.o. - HERON
Serbia, Subotica 24000, Pap Pal no.17
Tel.: +381 24 622 133
Fax: +381 24 622 135
E-mail: info@madalbal.rs

Visit us
- HERON: www.agregat.rs
- Madal Bal: www.veleprodajaalata.rs
www.svetalata.rs

The company, "Madal Bal", was founded in Switzerland in 1978 and successfully operates in more than ten countries.

In this part of Europe: Serbia, Czech Republic, Slovakia, Hungary, Macedonia, etc. we deal with selling tools. The reason for the excellent quality-price ratio is a unified line of business from the factory to the sales.

Why pay too much for well-known brands? Try us!



If you need electricity for construction machinery, for a weekend house or a boat, or you want to water the garden or pump water out from ponds, HERON generators and HERON pumps make it possible with appropriate power, reliability and ease. The "soul" of these devices is the HERON engine, which is used throughout the world in different versions, often under extremely difficult conditions.

Production - HERON generators and pumps are manufactured in modern facilities for the production of industrial combustion engines, power from 1 to 300 kW. They are not only used in the generators, spare power sources and pumps, but also in snow graders, tractors and other machines.

Quality - The production takes place in accordance with the requirements of ISO 9001 quality standards and standards for environmental protection ISO 14001. In addition, machines are subjected to controls in accordance with the regulations of the European Union CE and the United States. All HERON products are checked several times during production, starting with the quality of the basic raw materials, through the parts that are being used, until the final testing by controlling functionality.

Industrial generators - HERON generators are versatile, can be used occasionally and temporarily, but also daily in the industrial sector.

HERON technology - One of the most important characteristics of the HERON generator is, that even at rated load does not work at the edge of its maximum, but they fully meet the specific technical parameters. HERON generators are reliable and already have such modern technological solutions even with their standard equipment, that are usually available only as an accessory for higher prices.

Most HERON industrial generators are equipped with a system for compensating for voltage AVR (Automatic Voltage Regulation), but thanks to the quality of the output voltage board max. to ± 5%, can be used to power electronic devices.

HERON generators with frame above 2KVA are equipped with a digital counter of working hours, which simplifies the determination of the terms of periodic maintenance.

All generators are equipped with a system for automatic control of the oil level, which in case of low oil level, turns the engine off, thus prevent its failure, but does not replace the oil level checkup before starting the engine.

Construction - Electricity generators with a frame are equipped with a synchronous generator with a high-quality coil, which is resistant to thermal shock in case of dynamic loads.The massive frame protects the device from damage and makes its transport easier. Construction under the conditions of ISO 8528-8, does not demand grounding. The producer provides the electrical safety of the generator. Protection against accidental contact should be provided according to the guidelines of the applicable standards.

Usage - Single-phase and three-phase HERON generators of industrial series are ideal source of stable voltage during construction works, works on terrain, mobile service units, but also in weekend houses during holidays, in gardens, etc. Thanks to the voltage regulation system, they are suitable for electric power supply, for heaters and lights, and some types of welding machines. They can also be used as reliable backup power sources.

Gasoline pumps - HERON gasoline pumps represent the ideal solution for watering gardens and fertile land, transportation of large quantities of water, eg. swimming pools, ponds, fire reservoirs, etc.

Sludge pumps - HERON sludge pumps are used for transportation of sludgy water even with solid pieces, and can be used for the transportation of water out of ditches, cesspools, canals or water-flooded spaces. Our offer of HERON pumps will satisfy even the most demanding clients.

Pumps
- pumping: the emphasis is on the quantity of transported water
- pressure: the emphasis is on the height of the water supply or on the pressure
- sludge: for large transportation needs and for dirty water

Construction and equipment - HERON pumps are produced with four-stroke engines with HERON transistor, with contactless ignition. The compact design is high-strength light-alloy, there is no need for the application of conveyor belts or chains, so their reliability is higher and maintenance is easier. Each pump has an oil level sensor, which at low oil level, stops the engine. The shaft has a quality seal of a ceramic silicone covered sliding ring. Suction basket protects the pump from excessive hard particles and protects the pump from clogging. HERON sludge pumps - thanks to their robust design and solid double-layer pipe - are very well protected from mechanical damage. The extremely powerful engine makes the transportation of dirty water possible, even if containing solid parts up to max. 30 mm diameter. The standard handles and wheels allow easy maneuvering even on a difficult terrain.

service description:

☼ PetroSOLAR ☼ Smart Urban Solar Energy Furniture
We are available for all details and commercial arrangements

☼ Petro SOLAR ☼

¤ An intelligent solar powered mobiliar
¤ Smart solar benches
¤ Smart advertising totems
¤ Smart Bus Stops

We are presenting to you ☼ Petro SOLAR ☼ a line of Intelligent and Energy Independent products powered solely by SOLAR ENERGY, making them an ideal solution for setting up at a number of touristic and business locations such as: cities, national parks, corridors, excursion sites, squares, promenades...

☼ AUREA 2017 Award for the Investment of the Year ☼



All☼ PetroSOLAR ☼ products in the basic version possess:
¤ Free USB chargers for mobile devices
¤ Wi-Fi wireless internet
¤ LED Self-Lighting and Advertising Positions
¤ for special request the following can be integrated: interactive/touch/ monitors, sensors for air quality, noise level,...


☼ Smart Bus Stops ☼


☼ Smart Benches ☼


☼ Smart Advertising Totems ☼


☼ Montenegro Viewpoint Stagvac PetroSOLAR Smart Bench Serbia, bus shelters



☼ PetroSOLAR Smart Solar Bench in Abu DHabi UAE Dubai

Contact: Lazar Jošanov, autor

mob. tel.: + 381 62 760 339
e-mail: Lazarjosanov@petrosolar.com
e-mail 2: lazarjosanov@gmail.com


☼More details: ☼Petro SOLAR☼

service description:

service description:

Elevator, a company for designing, production and maintenance Electronics Devices and machines.

Elevators, moving staircase. Planning, installation, builting in and supporting of the stairs.

service description:

ROLLS, GARAGE DOORS, CUTTING AND BENDING TINS, METAL PLASTIFICATION
METAL GALVANIZATION AND SANDBLASTING

Our company was formed in 1992. with the name DSN.
We were between the first companies who started to make rolls and roll doors.
Experience and reference in whole country, helped to upgrade our business to a good level.
We have production space over 1000 square meters, where are working only highly qualified workers, with modern production processes.

We produce decorative outdoor security grids, with 8mm cold pulled steel, and at the end we plastificate it with different colors.
These security outdoor grids are mostly used at shop windows. The most important is security, esthetics and of course the visibility of the shop.
We make and procure remote control lifting bars

Types :
1) bigger roll-grids with size : "okca" 140x90 mm
2) smaller roll-grids with size : 60x40 mm

service description:

" COLDYCO - CLIMA " d.o.o.

Our company is located in Beograd at street Tomasa Jezsa 15.
Our experience in planning, engineering jobs, carrying out work tasks, installing air conditioners, installing ventilation systems, heating, cooling is more than 19years.
Number of our clients throughout the country is very high, we list only some of these, such as: Velefarm - Beograd, Nis, Novi Sad, Hotel M - Beograd, Takovo - Gornji Milanovac, Hotel Sumadija - Beograd, Kulai Bank - Kula, Roda mozi - Beograd, Publik - Valjevo, Vero III - Beograd, Megatrent - Novi Beograd, Fon - Beograd, Presztiz hotel - Beograd, SC - Kovilovo, PTT - Prokuplje, Soko Stark - Beograd .....

We are authorized importers and distributors of the most popular air conditioner manufacturers, such as "Mitsubishi Electric" and "Mitsubishi Heavy Industries"

We have a strong market position, thanks to the time of installation, maintenance and repair and thanks to the quality of our work.
To be able to offer a full-service market, we established a partnership with the "AEROKLIMA" doo company from Beograd.

service description:

Production and selling of cutting tools for metal and wood processing (knives, millers, drillers, saws, carvers, toothers, special tools).
Tools from hard metal, tiles for grinding, milling and cutting.
Carriers of changing tiles, tools for grinding, whetstons, measuring tools.
Agricultural machinery: cultivators with connections, mowers and tractor connections.

service description:

N E O F Y T O N
PARTNERSHIP TO SUCCESS


WHO ARE WE?

Neofyton ltd is the general agent of the worlds largest manufacturers of machines and accessories for the plastics industry.

We are a dynamic company oriented towards innovation and delivery of the best solution to customers. With more than 30 years of experience in the field of plastic injection system design, the companys goal is to deliver the highest standard of service at all times - the highest quality equipment and service, from a single source.

The potential of our success is based on representing world leaders in the plastics and rubber processing industry - Engel, Piovan, Eurochiller, Wintec, MB Conveyors and Tria on the European market (Serbia, Croatia, Bosnia and Herzegovina, Macedonia, Montenegro) and in Africa (Nigeria, Ghana and Cameroon).

By designing, implementing, monitoring, automating and maintaining more than 1000 plastic injection molding machines, Neofyton is positioned at the very top of the sellers of state-of-the-art plastic injection molding machines. Our professional and trained team from all organizational structures of the company, justifies the acquired trust of clients and gives them additional security in doing business with Neofyton.

Turnkey

Turnkey

Neofyton operates according to ISO 9001:2015 standards with a constant striving for further improvement of business, as well as of the service we provide to our customers. The company has proven its success by constantly investing in the development of services and providing a complete system of solutions for your business - training, education, design services, consulting services, servicing, importation and delivery of equipment. We direct our expertise towards the constant aspiration to create a precise and unique turnkey solution for each customer.

Integration of systems from "smart" machines, services to "smart" factories and modern production to the highest standards of quality, productivity.


Always close to the customers
In order to bring our service even closer and respond to the requests of our customers as quickly as possible, our service teams are deployed in several locations: Novi Sad, Zagreb, Skopje, Lagos.


A satisfied customer is our biggest advantage
The philosophy of our business is based on providing top services to our clients, delivering not only machines and equipment, but a complete system of solutions and thus build a partnership with the customers. As a result, Neofyton invests in connecting its customers, cooperating with foreign partners, and often assists customers in signing new business contracts.


Our companys future development strategy is aimed at meeting the requirements:

DEDICATED TO CLIENTS - The company Neofyton is partnering with its customers, taking into account their best interests. PROFESSIONAL - We strive to provide the best service to our customers and exceed their expectations. ETHICAL - We approach every job responsibly. LOYAL - First of all to our customers, creating a solution for each of their requests. TEAM PLAYERS - Neofyton is run by a team of top professionals who focus their expertise on providing the best service. INNOVATORS - Following the demands of the market, Neofyton strives to always be the first to offer new technological solutions. We represent leading companies in the field of plastic and rubber processing. DIFFERENT - Always ahead of the competition, known for providing complete know-how, turnkey solutions. LEADERS - Neofyton strives to be the best in the service it provides. We are constantly expanding our product offer, always offering new solutions.


ENGEL - The ideal machine concept for all applications: it is convincing thanks to its experience and expertise as a global market leader in plastic processing machines, with its proven and innovative plastic injection molding machines with a closing force of 280 kN up to 55,000 kN, hydraulic, fully electrified, horizontal and vertical solutions.

PIOVAN - is a world leader in the development and production of auxiliary systems for automation of storage, transport and processing of polymers, plastics and food, providing engineering solutions and services. From outdoor silos to centralized feeding systems: they design and produce integrated and flexible solutions for all types of plastics.

WINTEC - plastic injection machines. WINTEC is 100% owned by the Austrian company ENGEL.

EUROCHILLER - Eurochiller, a manufacturer of industrial refrigeration systems, stands out from its competitors in terms of the constant development of "green" technologies and the development of chillers with high energy efficiency. In its offer, Eurochiller especially singles out chillers with adiabatic cooling, which, in addition to great savings in energy consumption, also enable great process stability, as well as maximum product quality.

TRIA - The Italian company TRIA in its offer includes mills for grinding plastics for various purposes - foils, large plastic parts, plate elements, monofilaments; mills for grinding blown plastic, injection molding, thermoforming and extruded plastics.

MB CONVEYORS - They offer close-fitting solutions, machinery and systems for every application and need in the field of industrial handling: MB Transporters.

Contact:
Address: Novi Sad, Partizanska 27b
Tel: 021/452-642
Fax: 021/4723248
E-mail: info@neofyton.com
Web: www.neofyton.com

service description: